In a hydrolysate, glutamate needs two readings together: free glutamate in AA-1, which hydrolysis released, and total glutamate in AA-T, the full composition after remaining peptides are broken down. Most hydrolysates are powders, so AA-1 is $150 per sample, plus $30 for powders that need weighing and extraction. The gap between free and total indicates the peptide-bound share. Neither reading can prove how much MSG was added.
What glutamate means in this matrix
Glutamic acid is the amino acid behind glutamate, the savoury, umami signal. In foods it is present mainly in its ionised form, glutamate: the same amino acid in a different chemical state, not a second ingredient.
A protein hydrolysate is protein already partly broken down, by enzymes, acid, or fermentation, into peptides and free amino acids. Suppliers, formulators, and QA teams ask about its profile for two questions: does this batch match the last one, and does the profile match what the ingredient is bought for: a media supplement, food ingredient, flavour base, or nutrition product.
Source protein sets the overall composition; process sets how much is free versus bound in peptides. Two products with the same name can differ a lot: one mostly peptides with few free amino acids, another extensively broken down with a large free fraction. A free result alone understates a lightly hydrolysed product; a total result alone hides the character that drives taste and solubility.
Sample preparation
Send the hydrolysate as supplied, powder or liquid, and state source protein and maker if known, plus the lot identifier for the report. Batch comparison only works if lot identity survives into the paperwork. Email us if the same ingredient needs both readings so the pairing is set up on the same batch. Matrix-effect qualification (PREP-2), where a matrix may affect recovery, is a spike-recovery check at $200 per assay, one-time per formulation, waived at 20 or more samples.
Reporting bases and MSG equivalents
Name the basis before comparing: glutamic acid, glutamate, MSG anhydrous equivalent, or MSG monohydrate equivalent. Mixing bases, or mixing free with total, creates a false difference.
Verified PubChem molar masses: glutamic acid 147.13, MSG anhydrous 169.11, MSG monohydrate 187.13. As MSG anhydrous equivalent, multiply a glutamic acid result by 169.11 / 147.13, about 1.149. As MSG monohydrate equivalent, multiply by 187.13 / 147.13, about 1.272. Worked shape only: 100 units as glutamic acid are about 114.9 units as MSG anhydrous equivalent, or about 127.2 units as MSG monohydrate equivalent. State which form, and whether the result was free or total.
Free glutamic acid is measured without hydrolysis. Total glutamic acid, in AA-T, is measured after acid hydrolysis in 6 N HCl at 110 °C for 24 hours. Total minus free, read carefully, indicates the peptide-bound share; read it as the working estimate of the degree of hydrolysis. A result cannot prove how much MSG was added, which source contributed what, or whether a product meets a labelling rule. No health, safety, or labelling-compliance claim is made here.
What hydrolysis does to glutamic acid. During acid hydrolysis glutamine is converted to glutamic acid, so a total result includes glutamate that was originally glutamine and is read as Glu plus Gln.
What the report shows
Each measured amino acid individually, plus ammonia on the free panel, on a stated reporting basis, with the chromatogram behind each number. Ammonia is reported on AA-1 so it can be tracked lot to lot. Free and total results for one batch are presented side by side. The report does not certify an ingredient against a specification.
Worked example: three lots
Illustrative numbers for arithmetic only, not measured data. Peptide-bound share is total glutamic acid minus free, as a share of total.
| Lot | Free (g/100 g) | Total (g/100 g) | Peptide-bound share |
|---|---|---|---|
| A | 2.0 | 10.0 | 80 percent |
| B | 5.0 | 10.0 | 50 percent |
| C | 8.0 | 10.0 | 20 percent |
A higher free share means more has been released from peptides. This is not a standard degree-of-hydrolysis measurement, which counts cleaved peptide bonds by other methods.
Performance figures come from the published method; every report includes our own calibration and QC for the run. Reports also show AABA, the internal standard we add to every sample. It is not a result for your sample.
Price and next step
- AA-1 free amino acid profile: $150 per sample for liquids. Solids and powders that need weighing, extraction and filtration add $30 per sample (PREP-1), so a typical powder is $180. Powders that simply dissolve in water or buffer have no prep charge. $125 per sample at 15 or more samples a month, and $99 at 30 or more a month on a 6-month plan.
- AA-T total amino acid profile: 16 amino acids after acid hydrolysis (6 N HCl, 110 °C, 24 h), reported in g/100 g and mol%, $230 per sample including hydrolysis.
- Pilot: 5 AA-1 samples with a full report for $250, one per company, credited in full toward a first order of 20 or more samples within 90 days.
Free and total on one lot price as two samples.
Overnight turnaround available, with expedited service on request. Standard results in 3 to 5 business days from receipt. Email info@openchemworks.com with the source protein, maker, lot identifier, and whether you need free, total or both before shipping.
Send a sample
- Sample amount: Liquids (media, broth, wort, juice, drinks): 200 µL per sample, 400 µL preferred. Plasma and urine from 15 µL, for research use only, not for clinical diagnosis. Solids and powders: at least 100 mg.
- Freeze and ship: Freeze liquids soon after collection and keep them frozen in transit. Label each tube with the sample ID exactly as on your sample sheet. Book online first: we confirm your start date by email and send the sample sheet and shipping address. Details are on how to send samples.
- What the report includes: Results in the units you need, the chromatogram, and the calibration and QC results for your run. See the example report.
- Turnaround: Overnight turnaround available, with expedited service on request. Standard results in 3 to 5 business days from receipt. Tell us your sample count and type, and we'll confirm timing.
Frequently asked questions
Why run both free and total?
Free shows what hydrolysis already released; total shows the full composition. The gap is the peptide-bound share.
Can this check batch consistency?
Yes, as a profile comparison on successive lots. Your limits remain your specification.
Powder or liquid for pricing?
Whichever form you submit. Most price as powders.
Can a result prove how much MSG was added?
No. The result measures the combined amount on the stated basis.
Is cysteine included?
No. Cysteine is excluded from AA-1; it needs a separate AA-3 workup.
You can order this panel from our amino acid analysis lab in Davis, California, with the chromatogram and QC in every report.
References
- PubChem: Glutamic Acid (CID 33032): Identity reference for the compound named on this page.
- PubChem: Monosodium Glutamate (CID 23672308): Molar masses for the MSG anhydrous and monohydrate equivalents stated on this page.
- Waters: Derivatization of Amino Acids Using Waters AccQ-Tag Chemistry: Method background for AQC derivatization and HPLC-UV amino acid analysis.
- Fountoulakis and Lahm, Journal of Chromatography A (1998): Asparagine and glutamine lose an amide residue during acid hydrolysis and are measured with aspartate and glutamate respectively.
- OpenChemWorks: Pricing: Published service and pricing copy (2026).
OpenChemWorks Laboratory · Reviewed by the OpenChemWorks laboratory · Published November 4, 2026 · Updated November 19, 2026