HPLC testing laboratory · Davis, CaliforniaPublished pricesBook onlineinfo@openchemworks.com
Applications

Glycine in protein powders

Published November 9, 2026Updated November 19, 20264 min readOpenChemWorks Laboratory
Short answer

For a protein powder, glycine is the amino-spiking tell. Free glycine in AA-1, by AQC (AccQ-Tag) HPLC with UV and fluorescence detection, shows glycine already added or free in the powder as sold; total glycine in AA-T shows the protein profile instead. AA-1 is $150 per sample, plus $30 for powders that need weighing and extraction. A high glycine result alone is not proof of spiking.

What glycine means in this matrix

Glycine is the simplest amino acid: its side chain is a single hydrogen atom, and PubChem describes it as the smallest of the standard amino acids. It occurs naturally in protein, is sweet-tasting, and is inexpensive to add.

In a protein powder, that combination is why glycine gets measured. Many headline protein figures are not measured as protein directly: nitrogen-based methods measure nitrogen and convert it to a protein figure, so a nitrogen-rich ingredient added to a powder can raise that figure. Adding glycine this way is sometimes called amino spiking or nitrogen spiking. Read alongside the other amino acids in the same sample, a glycine result helps check whether a profile looks like protein alone, or whether extra free glycine has been added. Brands and buyers use that check to accept a lot, query a supplier, or compare powders on profile. Declared added glycine is legitimate: a high result can confirm a label.

Sample preparation

A whey isolate, a pea-rice blend, and a collagen powder are all dry powders, but their amino acid patterns differ by source. A collagen-rich powder and a whey powder start from different profiles. Mix thoroughly: one corner of a tub may not represent the lot. Send the powder dry, as sold, well mixed, in a clean, sealed container labelled with product name and lot.

Flavour, sweetener, and other ingredients are part of the matrix, so list the full product as sold, including any declared added glycine. No expected glycine share for whey or any other product, and no pass or fail limit, is given here.

Reporting bases

Name the basis before drawing any conclusion. A free glycine result, in AA-1, measures glycine already unattached in the powder as received, with no hydrolysis step. Free is the spiking basis: if free glycine has been added, the free profile can show glycine out of proportion with the other amino acids in that same sample. A signal to check against the label, not a verdict.

A total glycine result, in AA-T, is measured after acid hydrolysis breaks protein chains apart, so it is free glycine plus glycine formerly bound inside protein. Total usually answers the overall profile and label questions: what the protein itself contains. State at submission which question you are asking.

Glycine is not converted from another amino acid during hydrolysis as glutamine and asparagine are, and it is not destroyed by acid hydrolysis as tryptophan is.

What hydrolysis does to glycine. Glycine is stable in 6 N HCl at 110 C and is reported as glycine in AA-T.

What the report shows

AA-1 covers 19 amino acids plus ammonia; cysteine is excluded and needs a separate AA-3 workup. Per-analyte AA-1 or AA-T results, the reporting basis used, and the chromatogram behind each number. For a spiking check, glycine is read within the full free profile of the same sample, not as a lone number. State whether the question is spiking, profile, or both.

Whey, pea and collagen compared

Native protein sources carry glycine at different shares. Collagen and gelatin are far richer in glycine than whey or pea, because glycine repeats along the collagen chain. So a high glycine share in a collagen powder is expected, while the same share in a whey powder is a flag. A 2020 review in Molecules (PMC7321410, cited below) describes nitrogen-based protein methods and adulterants in whey powder, with glycine named.

Run AA-1 to see free glycine and AA-T to see the protein profile. A large free glycine line in a powder with a modest total points to added glycine. A declared glycine ingredient explains it, and then the result confirms the label.

Performance figures come from the published method; every report includes our own calibration and QC for the run. Reports also show AABA, the internal standard we add to every sample. It is not a result for your sample.

Price and next step

  • AA-1 free amino acid profile: $150 per sample. Capsules, tablets and powders that need weighing, extraction and filtration add $30 per sample (PREP-1), so a typical solid is $180. Liquids are $150, and powders that simply dissolve in water or buffer have no prep charge. $125 per sample at 15 or more samples a month, and $99 at 30 or more a month on a 6-month plan.
  • AA-T total amino acid profile: 16 amino acids after acid hydrolysis (6 N HCl, 110 °C, 24 h), reported in g/100 g and mol%, $230 per sample including hydrolysis.
  • Pilot: 5 AA-1 samples with a full report for $250, one per company, credited in full toward a first order of 20 or more samples within 90 days.

Overnight turnaround available, with expedited service on request. Standard results in 3 to 5 business days from receipt. Email info@openchemworks.com with product name, lot, protein source, and whether added glycine is declared before shipping.

Send a sample

Before you send samples
  • Sample amount: Liquids (media, broth, wort, juice, drinks): 200 µL per sample, 400 µL preferred. Plasma and urine from 15 µL, for research use only, not for clinical diagnosis. Solids and powders: at least 100 mg.
  • Freeze and ship: Freeze liquids soon after collection and keep them frozen in transit. Label each tube with the sample ID exactly as on your sample sheet. Book online first: we confirm your start date by email and send the sample sheet and shipping address. Details are on how to send samples.
  • What the report includes: Results in the units you need, the chromatogram, and the calibration and QC results for your run. See the example report.
  • Turnaround: Overnight turnaround available, with expedited service on request. Standard results in 3 to 5 business days from receipt. Tell us your sample count and type, and we'll confirm timing.

Order samples (AA-1)

Frequently asked questions

Free or total for a spiking check?
Free in AA-1. Added glycine is a free-amino-acid question. Total in AA-T answers overall profile and label questions instead.

Is a high glycine result proof of spiking?
No. Declared added glycine, a collagen-rich source, and a blend can all raise glycine legitimately. It is a signal to check against the label.

Is cysteine included?
No. Cysteine is excluded from AA-1 and needs a separate AA-3 workup.

You can order this panel from our amino acid analysis lab in Davis, California, with the chromatogram and QC in every report.

References

  1. PubChem: Glycine (CID 750): Identity reference for the compound named on this page.
  2. Molecules (2020): PMC7321410: Nitrogen-based protein methods and adulterants in whey protein powder, glycine named.
  3. Collagen structure review: PMC4989561: Gly-X-Y repeat: glycine as a major building block in collagen-rich materials.
  4. Waters: Derivatization of Amino Acids Using Waters AccQ-Tag Chemistry: Method background for AQC derivatization and HPLC-UV amino acid analysis.
  5. Fountoulakis and Lahm, Journal of Chromatography A (1998): Asparagine and glutamine lose an amide residue during acid hydrolysis and are measured with aspartate and glutamate respectively.
  6. OpenChemWorks: Pricing: Published service and pricing copy (2026).

OpenChemWorks Laboratory · Reviewed by the OpenChemWorks laboratory · Published November 9, 2026 · Updated November 19, 2026

Ready to send samples?

Overnight turnaround available, with expedited service on request.
We use AQC derivatization with HPLC and dual UV and fluorescence detection. New clients can start with a $250 five-sample pilot, credited in full toward a first order of 20 or more samples within 90 days.