Amino Acid Analysis for Sauces, Savory Foods and Seasonings
Sauce makers and seasoning producers send us sauces, pastes and dry blends to check free glutamate when a recipe, fermentation or supplier changes. AA-1 reports it with the full free profile, and results can be stated as MSG equivalents.
Decisions this answers
- Did a fermentation or supplier change move the free glutamate in this sauce?
- Is a batch that tastes thin actually lower in free glutamate?
- How much free glutamate does a seasoning blend carry, and is it even across the lot?
Free glutamate and MSG equivalents
Free glutamate is the amino acid people ask about first, with aspartate alongside. AA-1 reports it with the full free profile. To express it as monosodium glutamate monohydrate, multiply glutamic acid by 1.27 (187.13 g/mol over 147.13 g/mol).
Illustrative example: a sauce with 0.60 g free glutamic acid per 100 g equals about 0.76 g MSG per 100 g (0.60 x 1.27). The number is made up to show the arithmetic.
Free glutamate is different from total glutamate. Intact protein holds glutamate that does not taste savory until it is broken down. Our guide on free versus total glutamate explains the difference.
Sauces, broths and pastes
Sauces are concentrated and often salty, sometimes high in sugar or fat. A thin broth or sauce that dilutes and filters is a liquid. A thick paste that needs weighing and extraction takes PREP-1. Shake or mix as for normal use before sealing, and tell us if the product separates on standing.
Dry seasonings and blends
A seasoning blend is a mixture of salt, herbs, spices, dehydrated vegetables and carriers. Two scoops from the same bag can differ if it has settled, so mix well before sampling, and say so if you want more than one portion tested to check evenness. Dry blends take PREP-1 for extraction, and the salty matrix is a reason for a PREP-2 spike-recovery check on a first sample.
Which test fits which product
| Product | Test | Price |
|---|---|---|
| Sauce, broth or liquid seasoning that dilutes and filters | AA-1 | $150 |
| Thick paste, dry blend or powder that needs extraction | AA-1 plus PREP-1 | $180 |
| Total profile of a less processed savory food | AA-T | $230 |
| First sample of a new very salty matrix | PREP-2 spike-recovery check, once per formulation | $200 per assay, waived at 20+ samples |
If you choose AA-T, what it reports and what it does not
- AA-T reports 16 amino acids after 6 N HCl hydrolysis at 110 °C for 24 hours, in g/100 g and mol%.
- Tryptophan is destroyed by the acid and is not reported.
- Cysteine and cystine are not reported in AA-T. Cysteine needs the AA-3 workup.
- Asparagine and glutamine convert to aspartate and glutamate, so they are reported with those two.
- Methionine can partly oxidize, so it can read low.
- Serine and threonine are partly lost during hydrolysis.
- Valine and isoleucine bonds hydrolyze slowly, so 24 hours can under-recover them.
Price
AA-1 is $150 per sample for a liquid. Pastes and dry blends that need extraction add PREP-1 at $30, for $180. AA-T is $230 including hydrolysis. Standing prices are $125 per sample at 15 or more samples a month and $99 at 30 or more. The minimum order is $150.
How much to send
Send 200 µL of liquid sauce per sample, with 400 µL preferred, or at least 100 mg of paste or dry blend, well mixed. Label each tube with the sample ID exactly as it appears on your sample sheet, and note the product type and the decision behind the sample. Book online first. We confirm the start date by email and send the sample sheet and the shipping address.
Turnaround
Overnight turnaround available, with expedited service on request. Standard results in 3 to 5 business days from receipt. Tell us your sample count and type, and we'll confirm timing.
What the report shows
Every report includes the results table, the chromatogram and the run's calibration and QC results. See the example report (PDF).
Results are on the product as sold unless you ask for another basis. If a PREP-2 check is run, the report shows the recovery and any corrected result next to the original.
FAQ
Free or total for a sauce?
Usually free (AA-1) for flavor questions, because free amino acids drive savory taste. Total (AA-T) is for a question about intact protein.
Can you measure just glutamate?
Glutamate is reported within AA-1 along with the full pattern, which shows whether a glutamate shift is isolated or part of a wider batch change.
Can you express glutamate as MSG?
Yes, by arithmetic. Multiply free glutamic acid by 1.27 for monosodium glutamate monohydrate. Tell us which basis you want.
Does a free glutamate result settle a "no MSG" statement?
No. It tells you how much free glutamate is in the product. Whether a statement is acceptable when ingredients such as hydrolyzed protein or yeast extract are present is a regulatory question for your advisor.
My sauce or blend is very salty. Does that matter?
It can. A PREP-2 spike-recovery check, once per formulation, shows whether the matrix pulls results up or down.
Are you accredited (ISO 17025, GLP or GMP)?
Not yet. Our testing supports research, product development and process monitoring. Every report includes the chromatogram, calibration and QC results, so you can see exactly how your numbers were made.
OpenChemWorks Laboratory · Reviewed by the OpenChemWorks laboratory · Updated November 19, 2026
Every result comes with the data behind it.
Each report includes the results table, the chromatogram and the run's quality-control summary, so your methods section or process record has what it needs.
Keep exploring
Related pages: the method behind these results, and the matrices closest to yours.
Glutamate in sauces and savory foods
Glutamate in sauces.
Explore → Matrix guideGlutamate in seasoning blends
Glutamate in seasoning blends.
Explore → GuideMSG testing for a seasoning blend
How to find out how much glutamate is in a blend.
Explore → GuideFree versus total glutamate
Which glutamate test answers your question.
Explore → ApplicationProtein hydrolysates and peptones
Hydrolysates, peptones and yeast extracts.
Explore →Ready to send samples?
Overnight turnaround available, with expedited service on request.
Order online at the order builder, or email info@openchemworks.com with your sample type and the decision the result will feed. We will confirm timing and the shipping details by email.