Updated November 19, 2026
Summary: key findings
- Tryptophan reads zero, and that is the method, not your product. In standard 6 N HCl hydrolysis at 110 °C, tryptophan is destroyed. A total-amino-acid report with no tryptophan line, or a zero, tells you the lab ran acid hydrolysis without a separate alkaline step. It tells you nothing about your sample's tryptophan.
- Asparagine and glutamine disappear by design, into other lines. Acid hydrolysis quantitatively deamidates Asn to aspartate and Gln to glutamate. Reports therefore carry Asx and Glx, not the original amides. If a report lists separate asparagine and glutamine values from a hydrolysed run, ask how.
- Serine and threonine read low by a published, correctable amount. The literature puts their loss at 24 h at 5–10% (Rutherfurd & Gilani 2016) to 5–15% (hydrolysis reviews and method guides). One published correction set (TNO, reported in a 2024 Frontiers in Nutrition review of human-milk amino acid data) uses factors of 1.10 for serine and 1.05 for threonine, which implies the uncorrected report sits about 9% low on serine and 5% low on threonine.
- Valine and isoleucine read low for the opposite reason: they are still locked up. Hydrophobic bonds release slowly; a 24 h hydrolysis recovers roughly 80–90% of valine and isoleucine from resistant cores, and the same TNO correction set uses 1.07 (valine) and 1.08 (isoleucine). Longer is not simply better: extending hydrolysis to free more Val/Ile destroys more Ser/Thr. That trade-off is built into every total-amino-acid number ever reported.
- Worked on a real profile, the distortions are larger than most lab-to-lab differences people argue about. Applying the published ranges to the WPC80 profile (true serine 4.08 g/100 g), a 24 h acid run should observe 3.47–3.88 g serine, not 4.08. Two labs, one correcting and one not, can differ by about 10% on serine while both doing competent work.
So what: When you compare total-amino-acid reports between labs, or against a specification, first ask which corrections were applied and how tryptophan, cysteine, and methionine were handled. Without those three answers, a 5–10% discrepancy on several lines is uninterpretable.
Why it matters: Total amino acid analysis is the measurement behind protein content claims, blend calculations, and DIAAS-style scores. Its known, published biases are not a scandal; they are a budget. Buyers who know the budget read reports correctly. Labs that publish their budget, as this article does for the method class, are the ones whose numbers can be trusted to mean something specific.
Introduction
Every total-amino-acid report is produced by hydrolysing the sample first, and the hydrolysis itself changes the numbers. This article quantifies that change: which amino acids read low after a standard acid hydrolysis, which are converted into other lines on the report, and which is destroyed outright, so that a zero on the page says something about the method and nothing about the product.
It matters because total amino acid analysis is the measurement behind protein content claims, blend calculations, and protein-quality scores. Two competent labs can report materially different values for the same sample purely because one applies published corrections and the other does not. Without knowing which corrections were applied, a discrepancy between reports cannot be interpreted at all.
The table that follows is computed, not measured: published loss ranges and a published set of correction factors are applied to a real whey protein concentrate profile from the U.S. Dairy Export Council Reference Manual, to show what a competent run should observe for each amino acid.
Read each row as a small budget: a true value, a fate under acid hydrolysis, the range a run should observe, and the correction that closes the gap. The error that happens before any chemistry, when the subsample taken from a powder does not represent the batch, is covered in the guide to how much sample to send.
What a competent hydrolysis run should observe
Dots are the true values in the WPC80 profile; whiskers are the expected observed ranges after acid hydrolysis.
The computed table: what a 24 h acid hydrolysis should observe
True profile: WPC80 amino acid composition from the U.S. Dairy Export Council Reference Manual (2005), p.51–52. Losses and corrections from the sources cited per row.
| Amino acid | True (g/100 g) | Fate in 6 N HCl, 110 °C, 24 h | Expected observed (g/100 g) | Correction |
|---|---|---|---|---|
| Tryptophan | 1.20 | Destroyed | 0 | Separate alkaline hydrolysis |
| Serine | 4.08 | Partially destroyed, 5–15% loss | 3.47–3.88 (scenario at 10%: 3.67) | Time-course extrapolation to t = 0; factor 1.10 |
| Threonine | 5.36 | Partially destroyed, 5–15% loss | 4.56–5.09 (scenario at 6.2%: 5.03) | Time-course extrapolation; factor 1.05 |
| Valine | 4.46 | Slowly released, 80–90% at 24 h | 3.56–4.01 (scenario: 4.17) | 48–72 h hydrolysis, or factor 1.07 |
| Isoleucine | 4.80 | Slowly released, 80–90% at 24 h | 3.84–4.32 (scenario: 4.44) | 48–72 h hydrolysis, or factor 1.08 |
| Asparagine | (inside Asp) | 100% converted to Asp | Reported as Asx only | None exists; measure free Asn without hydrolysis |
| Glutamine | (inside Glu) | 100% converted to Glu | Reported as Glx only | None exists; measure free Gln without hydrolysis |
| Cysteine/cystine | 2.72 | Partially destroyed/oxidised, variable | Not quantified here (see gap note) | Performic-acid oxidation to cysteic acid first |
| Methionine | 1.60 | Partially oxidised, variable | Not quantified here (see gap note) | Performic-acid oxidation to methionine sulfone first |
Worked example, serine scenario: true 4.08 g/100 g × (1 − 0.10) = 3.67 g observed. Applying the TNO factor in reverse: 4.08 ÷ 1.10 = 3.71 g, the value a lab that does not correct would report if its loss matched the TNO assumption. The two scenario numbers (3.67, 3.71) differ because they come from different published sources; the article shows both rather than averaging them into a false precision.
Gap note, stated plainly: for cysteine and methionine, the sources fetched for this version (Singh et al. 2014 review; Rutherfurd & Gilani 2016) establish the direction and the remedy (performic oxidation) but do not give a single defensible percentage loss for a standard 24 h run. This table therefore does not print one.
Published correction factors
The TNO factors a correcting lab multiplies by. A lab that applies none sits lower by exactly these factors.
Perspectives
Buyer. A report that omits Trp and Cys is not incomplete work; it is acid hydrolysis described honestly. Price the add-ons (alkaline hydrolysis for Trp, performic oxidation for sulfur amino acids) when you need those lines, and treat any lab that reports all 20 from a single acid run with suspicion.
Analytical. The Ser/Thr-versus-Val/Ile trade-off means hydrolysis time is a choice about which error you prefer. Time-course hydrolysis (24/48/72 h, extrapolate Ser/Thr back to zero time and Val/Ile to infinite time) is the published way to have both, at the cost of three runs.
Inter-lab. Correction practice is a hidden variable in lab-to-lab comparisons. Before disputing a result, exchange correction factors. A lab applying 1.10 to serine and a lab applying none will differ by 10% on that line forever, reproducibly.
Our own service. Every AA-T report states its hydrolysis conditions (6 N HCl, 110 °C, 24 h). AA-T reports 16 amino acids. Tryptophan is destroyed and is not reported, cysteine is not reported (the AA-3 workup adds it on request), and asparagine and glutamine are reported with aspartate and glutamate. Read serine and threonine as partly lost, methionine as partly oxidized, and valine and isoleucine as possibly under-recovered after 24 hours. The numbers in this article are the published budget for the method class, and our reports are read against it.
Get a total amino acid report that states its conditions
AA-T is $230 per sample, hydrolysis included (6 N HCl, 110 °C, 24 h), and reports 16 amino acids in g/100 g and mol%. Tryptophan after acid hydrolysis and cysteine/cystine are not reported; add AA-3 for cysteine on request. Free asparagine and glutamine come from a separate free profile, AA-1 ($150). Solids that need extraction add PREP-1 at +$30. A 24, 48 and 72 hour time course is not a standard offering; ask us if you need one.
Order total amino acid analysis See an example report
Sending a powder? How much sample to send covers amounts and particle size. Overnight turnaround available, with expedited service on request. Standard results in 3 to 5 business days from receipt.
Methods & Sources
- Standard conditions referenced throughout: 6 N (6 M) HCl, 110 °C, 24 h, under vacuum or inert atmosphere, per Singh et al. (2014), International Journal of Pharmacognosy review of amino acid analysis, and Rutherfurd & Gilani (2016), Nutrition Reviews 74:584–599 (DIAAS factors review), both fetched 2026-11-05.
- Ser/Thr loss ranges: Rutherfurd & Gilani (2016) give 5–10% degradation during HCl hydrolysis; method guides and the protein hydrolysis review literature give 5–15% at 24 h. Both ranges are shown.
- Correction factors: TNO factors (Thr 1.05, Ser 1.10, Val 1.07, Ile 1.08) as reported in "Amino acid requirements of the infant" review, Frontiers in Nutrition / PMC 2024 (PMC11443462), fetched 2026-11-05.
- Val/Ile 24 h release of 80–90%: Creative Proteomics amino acid analysis method guide, fetched 2026-11-05. This is a method-guide source, weaker than the peer-reviewed sources above, and is labeled as such wherever it carries a number alone.
- Asn/Gln quantitative deamidation and Trp destruction: Rutherfurd & Gilani (2016); Singh et al. (2014).
Paired reading: How Much Sample Do Labs Actually Need? is the explainer; it also gives the sampling statistics for powders.