HPLC testing laboratory · Davis, CaliforniaPublished pricesBook onlineinfo@openchemworks.com
Applications

BCAA testing for protein powders

Published November 9, 2026Updated November 19, 20264 min readOpenChemWorks Laboratory
Short answer

In a protein powder, BCAAs are mostly bound in the protein, so AA-T (total) describes the profile. Use AA-1 (free) when the maker adds free BCAAs and the label claims them. Leucine, isoleucine and valine are separate results in either test. Read total valine and isoleucine as minimums, because those bonds release slowly in 24 h hydrolysis.

Which test answers a BCAA question

Whey, pea-rice blends and collagen powders are all dry powders, but their amino acid patterns differ by source, and two powders with the same total protein can have different patterns. AA-T shows what the protein itself contains. AA-1 shows free amino acids only, which is where added instantised BCAAs would appear. Comparing a free result with a total-protein claim is a common source of false alarms, so state which claim you are checking.

Per-serving math

Results come as g/100 g or mol%. Multiply by the serving size to compare with the label. Worked arithmetic only: 8 g/100 g leucine with a 30 g serving gives 8 / 100 x 30 = 2.4 g leucine per serving. A large free BCAA line next to a modest total points to added free BCAAs; a label that declares them explains it.

Check the ratio

Native whey and pea protein carry the three BCAAs in their own proportions, which differ from a 2:1:1 label ratio. A measured ratio close to a stated 2:1:1 in a protein powder therefore suggests added free BCAAs, which AA-1 will show directly.

What to send

Scooping from one corner of a tub may not represent the lot, so thorough mixing matters as much as the test. Send the powder dry, as sold, well mixed, in a clean sealed container labelled with product name and lot, and list the full product as sold. Flavour and sweetener are part of the matrix.

Hydrolysis and BCAAs

What hydrolysis does to BCAAs. Valine and isoleucine bonds (Val-Val, Val-Ile, Ile-Ile) hydrolyse slowly, so a 24 h hydrolysis can under-recover them in a protein sample. Leucine is released in the standard 24 h hydrolysis. Free AA-1 results are not hydrolysed and are not affected. Asparagine and glutamine are reported with aspartic and glutamic acid, and tryptophan is destroyed, but neither touches the BCAAs.

What the report shows

Per-analyte results in the units you need, the chromatogram, and the calibration and QC for the run. Leucine, isoleucine and valine are resolved as separate peaks in the same run. Keep panel, form and basis the same across samples in a comparison set. Performance figures come from the published method; every report includes our own calibration and QC for the run. Reports also show AABA, the internal standard we add to every sample. It is not a result for your sample.

Price and next step

  • AA-1 free amino acid profile: $150 per sample. Capsules, tablets and powders that need weighing, extraction and filtration add $30 per sample (PREP-1), so a typical solid is $180. Liquids are $150, and powders that simply dissolve in water or buffer have no prep charge. $125 per sample at 15 or more samples a month, and $99 at 30 or more a month on a 6-month plan.
  • AA-T total amino acid profile: 16 amino acids after acid hydrolysis (6 N HCl, 110 °C, 24 h), reported in g/100 g and mol%, $230 per sample including hydrolysis.
  • Pilot: 5 AA-1 samples with a full report for $250, one per company, credited in full toward a first order of 20 or more samples within 90 days.

Overnight turnaround available, with expedited service on request. Standard results in 3 to 5 business days from receipt. Email info@openchemworks.com with product name, lot, protein source, and the label claim or specification you are checking before shipping.

Send a sample

Before you send samples
  • Sample amount: Liquids (media, broth, wort, juice, drinks): 200 µL per sample, 400 µL preferred. Plasma and urine from 15 µL, for research use only, not for clinical diagnosis. Solids and powders: at least 100 mg.
  • Freeze and ship: Freeze liquids soon after collection and keep them frozen in transit. Label each tube with the sample ID exactly as on your sample sheet. Book online first: we confirm your start date by email and send the sample sheet and shipping address. Details are on how to send samples.
  • What the report includes: Results in the units you need, the chromatogram, and the calibration and QC results for your run. See the example report.
  • Turnaround: Overnight turnaround available, with expedited service on request. Standard results in 3 to 5 business days from receipt. Tell us your sample count and type, and we'll confirm timing.

Order samples (AA-T)

Frequently asked questions

Do I run AA-T or AA-1 for a protein powder?
AA-T for the protein profile, because most BCAAs are protein-bound. AA-1 when free BCAAs were added and the label claims them.

Is the BCAA result a combined total?
No. Leucine, isoleucine and valine are reported as separate results. Add them yourself if the label states a total.

Why can total valine and isoleucine read low?
Valine and isoleucine bonds release slowly in 24 h acid hydrolysis, so a total result can under-recover them. Treat total valine and isoleucine as minimums.

Can I test leucine or isoleucine alone?
They come in the same run as valine, so you get all three for the price of one sample.

You can order this panel from our amino acid analysis lab in Davis, California, with the chromatogram and QC in every report.

References

  1. PubChem: L-Valine (CID 6287): Identity reference for the compound named on this page.
  2. PubChem: L-Leucine (CID 6106): Identity reference for the compound named on this page.
  3. Waters: Derivatization of Amino Acids Using Waters AccQ-Tag Chemistry: Method background for AQC derivatization and HPLC-UV amino acid analysis.
  4. Fountoulakis and Lahm, Journal of Chromatography A (1998): Asparagine and glutamine lose an amide residue during acid hydrolysis and are measured with aspartate and glutamate respectively.
  5. OpenChemWorks: Pricing: Published service and pricing copy (2026).

OpenChemWorks Laboratory · Reviewed by the OpenChemWorks laboratory · Published November 9, 2026 · Updated November 19, 2026

Ready to send samples?

Overnight turnaround available, with expedited service on request.
We use AQC derivatization with HPLC and dual UV and fluorescence detection. New clients can start with a $250 five-sample pilot, credited in full toward a first order of 20 or more samples within 90 days.