Amino Acid Testing for Food Products
Small food brands, co-packers and ingredient buyers send us food products to check amino acid and protein claims. AA-1 measures free amino acids and AA-T measures the total profile. This page shows which to choose, what they cannot measure, how much to send and what it costs.
Who needs it
- Small food brands checking a protein or amino acid claim before it goes on a label.
- Co-packers and QA teams comparing production runs or a supplier change.
- Ingredient buyers checking that a protein, hydrolysate or yeast extract matches what was ordered.
- Product developers following glutamate, free amino acids or a fermentation change in a savory or plant-based product.
Free or total
| Question | Test | Why |
|---|---|---|
| Savory taste, glutamate, fermentation, drinks | AA-1 free amino acids | Free amino acids are the ones that taste and the ones fermentation changes. |
| Protein profile, blend balance, label protein | AA-T total amino acids | Protein-bound amino acids need acid hydrolysis before they can be measured. |
| Added free amino acids in a powder or bar | AA-1 | Intact protein releases almost no free amino acid, so added ones stand out. |
| Hydrolysates and yeast extracts | Both on the same lot | The gap shows how far hydrolysis went. |
Our guide to free versus total amino acids goes into more detail.
What the panels measure, and what they cannot
- AA-1 reports 19 amino acids plus ammonia, in µM and mg/L. Free tryptophan, asparagine and glutamine are reported as themselves. Cysteine is not in AA-1.
- AA-T reports 16 amino acids after hydrolysis, in g/100 g and mol%.
- Not offered: protein content by nitrogen, and tryptophan or cysteine after acid hydrolysis.
- Creatine is a separate test (CR-1, $120), and taurine is AA-1 (Taurine).
AA-T limits, in full
- AA-T reports 16 amino acids after 6 N HCl hydrolysis at 110 °C for 24 hours, in g/100 g and mol%.
- Tryptophan is destroyed by the acid and is not reported.
- Cysteine and cystine are not reported in AA-T. Cysteine needs the AA-3 workup.
- Asparagine and glutamine convert to aspartate and glutamate, so they are reported with those two.
- Methionine can partly oxidize, so it can read low.
- Serine and threonine are partly lost during hydrolysis.
- Valine and isoleucine bonds hydrolyze slowly, so 24 hours can under-recover them.
Price
| Test | Price per sample | Notes |
|---|---|---|
| AA-1 free amino acid profile | $150 | Liquids, and powders that simply dissolve in water or buffer |
| AA-1 with PREP-1 | $180 | Solids and powders that need weighing, extraction and filtration (+$30) |
| AA-T total amino acid profile | $230 | Includes hydrolysis (PREP-H) |
| AA-1 (Taurine) | $150 | The full AA-1 analysis with taurine added |
| CR-1 creatine | $120 | Flat |
The minimum order is $150. Standing prices are $125 per sample at 15 or more samples a month and $99 at 30 or more. New customers can start with a pilot of 5 AA-1 samples for $250, credited in full toward a first order of 20 or more samples within 90 days.
How much to send
Liquids (drinks, broth, juice, media) need 200 µL per sample, and 400 µL is preferred. Solids and powders need at least 100 mg. Label each tube with the sample ID exactly as it appears on your sample sheet. Book online first. We confirm the start date by email and send the sample sheet and the shipping address. Mix or homogenize the product first so the portion represents it.
Turnaround
Overnight turnaround available, with expedited service on request. Standard results in 3 to 5 business days from receipt. Tell us your sample count and type, and we'll confirm timing.
Example report
Every report includes the results table, the chromatogram and the run's calibration and QC results. See the example report (PDF).
Each result is listed with the chromatogram and the run's QC results, so you can see how the number was made.
FAQ
What is the cheapest way to test one food product?
One AA-1 sample is $150, which is also the minimum order. A solid that needs extraction adds PREP-1 at $30, for $180. A total profile (AA-T) is $230.
Do I need free or total analysis?
Free (AA-1) for flavor, fermentation, added amino acids and drinks. Total (AA-T) for the protein profile and for checking amino acids against the label protein. Some products need both.
Can you measure protein content?
Not by nitrogen. We do not offer protein content by nitrogen. AA-T gives the amino acids after hydrolysis, and their sum is a useful comparison with label protein, but it is not a nitrogen-based protein value.
Can you report tryptophan or cysteine in a food?
Free tryptophan is part of AA-1. After acid hydrolysis (AA-T), tryptophan is destroyed and cysteine is not reported, so we do not offer either on AA-T. Cysteine needs the AA-3 workup, priced after a free call.
How much food do I need to send?
At least 100 mg of solid, or 200 µL of liquid with 400 µL preferred, per sample. Mix or homogenize the product first so the portion represents it.
Are you accredited (ISO 17025, GLP or GMP)?
Not yet. Our testing supports research, product development and process monitoring. Every report includes the chromatogram, calibration and QC results, so you can see exactly how your numbers were made.
OpenChemWorks Laboratory · Reviewed by the OpenChemWorks laboratory · Updated November 19, 2026
Every result comes with the data behind it.
Each report includes the results table, the chromatogram and the run's quality-control summary, so your methods section or process record has what it needs.
Keep exploring
Related pages: the method behind these results, and the matrices closest to yours.
Protein powders, bars and shakes
Powders, bars and shakes: is the protein real?
Explore → ApplicationPlant-based foods
Blend balance and fermentation in plant-based foods.
Explore → ApplicationSauces, savory foods and seasonings
Free glutamate in sauces, pastes and seasonings.
Explore → ApplicationDietary supplements
Label checks with salt-form conversion.
Explore → GuideHow to get a single food sample tested
Five questions to ask any lab.
Explore → GuideLabel claims for small food brands
What testing backs a label claim.
Explore →Ready to send samples?
Overnight turnaround available, with expedited service on request.
Order online at the order builder, or email info@openchemworks.com with your sample type and the decision the result will feed. We will confirm timing and the shipping details by email.